Skip to content
Get started free

Test

HSE+S Orientation exam SET A

By MAGP Safety · All grades · Published Nov 18, 2026 · New

HSE+S Orientation exam SET A

60 questions · 60 points

  1. Question 1 · One correct answer · 1 point

    1. What does HSE+S stand for in the Mt. Apo Geothermal Facility orientation?

    1. A. Health, Security, Energy and Sustainability
    2. B. Health, Safety, Environment and Security
    3. C. Hazard, Safety, Emergency and Security
    4. D. Health, Systems, Engineering and Safety
  2. Question 2 · One correct answer · 1 point

    2. Which company is identified in the orientation as the operator of the Mt. Apo Geothermal Project?

    1. A. National Power Corporation
    2. B. Department of Energy
    3. C. Energy Development Corporation
    4. D. National Grid Corporation of the Philippines
  3. Question 3 · One correct answer · 1 point

    3. Where is the Mt. Apo Geothermal Power Plant located?

    1. A. Barangay Ilomavis, Kidapawan, Cotabato
    2. B. Barangay Calinan, Davao City
    3. C. Barangay Kapatagan, Digos City
    4. D. Barangay Poblacion, Makilala
  4. Question 4 · One correct answer · 1 point

    4. What is the primary purpose of Personal Protective Equipment (PPE)?

    1. A. To replace engineering controls
    2. B. To improve worker appearance
    3. C. To eliminate all workplace hazards
    4. D. To reduce exposure to workplace hazards
  5. Question 5 · One correct answer · 1 point

    5. What does H₂S stand for?

    1. A. Hydrogen Sulfate
    2. B. Hydrogen Sulfide
    3. C. Hydrochloric Sulfide
    4. D. Hydrogen Sulfite
  6. Question 6 · One correct answer · 1 point

    6. Which of the following is a common warning characteristic of hydrogen sulfide at low concentrations?

    1. A. Sweet fruity odor
    2. B. Bright yellow color
    3. C. Rotten-egg odor
    4. D. Strong chlorine odor
  7. Question 7 · One correct answer · 1 point

    7. What should a worker do upon observing an unsafe act or condition?

    1. A. Immediately report it to the host or Safety Officer
    2. B. Ignore it if no injury has occurred
    3. C. Wait until the next safety meeting
    4. D. Continue working and report it at the end of the shift
  8. Question 8 · One correct answer · 1 point

    8. Who is authorized to exercise Stop Work Authority at the facility?

    1. A. Only the Facility Head
    2. B. Only the Safety Officer
    3. C. Only the Nominated Supervisor
    4. D. All personnel
  9. Question 9 · One correct answer · 1 point

    9. Which of the following is the most effective level in the Hierarchy of Controls?

    1. A. Administrative controls
    2. B. Elimination
    3. C. Personal protective equipment
    4. D. Engineering controls
  10. Question 10 · One correct answer · 1 point

    10. What does LOTO mean?

    1. A. Lockout/Tagout
    2. B. Log of Technical Operations
    3. C. Level of Task Observation
    4. D. Locking of Temporary Openings
  11. Question 11 · One correct answer · 1 point

    11. What should personnel do when a facility emergency evacuation alarm is activated?

    1. A. Continue working until their task is completed
    2. B. Return to the locker room to collect personal belongings
    3. C. Stop work and follow the evacuation instructions
    4. D. Wait for a second alarm before responding
  12. Question 12 · One correct answer · 1 point

    12. Which item is strictly prohibited in the M3 Binary Plant explosive-atmosphere zone?

    1. A. Approved FRAS suit
    2. B. Static-dissipative safety shoes
    3. C. Required protective helmet
    4. D. Personal mobile phone
  13. Question 13 · One correct answer · 1 point

    13. What is the purpose of a designated emergency muster point?

    1. A. To store emergency response equipment
    2. B. To provide a safe assembly and accountability location
    3. C. To conduct routine maintenance meetings
    4. D. To park emergency vehicles
  14. Question 14 · One correct answer · 1 point

    14. What is the facility's policy regarding personnel entering under the influence of alcohol or prohibited drugs?

    1. A. Entry is prohibited
    2. B. Entry is allowed with supervisor permission
    3. C. Entry is allowed for office-based personnel
    4. D. Entry is allowed if no heavy equipment is operated
  15. Question 15 · One correct answer · 1 point

    15. Which environmental practice is promoted by the facility?

    1. A. Disposing of waste in the nearest open area
    2. B. Mixing recyclable and hazardous waste
    3. C. Proper waste segregation and Clean As You Go (CLAYGO)
    4. D. Leaving waste for the next shift to collect
  16. Question 16 · One correct answer · 1 point

    16. Under the EDC-adopted ESBI hazard categorization, which of the following is classified as a system-derived hazard?

    1. A. Biological exposure from insects
    2. B. Falling from an elevated walkway
    3. C. Vehicle collision along an access road
    4. D. Uncontrolled release of high-pressure steam from a process line
  17. Question 17 · One correct answer · 1 point

    17. A worker identifies a leaking steam pipeline and recognizes the possibility of severe burns. Which statement correctly differentiates the hazard from the risk?

    1. A. The pipeline is the risk, while the burn injury is the hazard
    2. B. The leaking high-temperature steam is the hazard, while the likelihood and severity of burn injury describe the risk
    3. C. The hazard and risk are identical
    4. D. The risk exists only after someone is injured
  18. Question 18 · One correct answer · 1 point

    18. A worker is positioned directly beneath a suspended load during lifting operations. Which Life-Saving Rule is primarily being violated?

    1. A. Line of Fire
    2. B. Driving
    3. C. Hot Work
    4. D. Confined Space
  19. Question 19 · One correct answer · 1 point

    19. A worker notices a strong rotten-egg odor near a geothermal steam line, but the odor suddenly disappears. What is the safest interpretation?

    1. A. The gas has completely dispersed
    2. B. The area is safe because the odor is gone
    3. C. H₂S may still be present at dangerous concentrations; personnel must not rely on smell
    4. D. The worker may continue if no other symptoms occur
  20. Question 20 · One correct answer · 1 point

    20. A worker begins experiencing dizziness and eye irritation in an area with possible H₂S exposure. What is the most appropriate immediate action?

    1. A. Remain in position and wait for symptoms to subside
    2. B. Remove the respirator to improve breathing
    3. C. Move toward the suspected gas source to investigate
    4. D. Notify the host and move promptly toward fresh air, avoiding the suspected plume
  21. Question 21 · One correct answer · 1 point

    21. During a risk assessment, a team determines that a hazardous chemical can be completely removed from the work process. Which control should be prioritized?

    1. A. Elimination
    2. B. Administrative controls
    3. C. PPE
    4. D. Warning signage
  22. Question 22 · One correct answer · 1 point

    22. A maintenance team plans to service machinery containing electrical, hydraulic, and stored pressure energy. What is the most appropriate safety requirement before work begins?

    1. A. Post warning signs only
    2. B. Wear gloves and begin maintenance
    3. C. Isolate hazardous energy sources and apply the required LOTO procedure
    4. D. Notify the control room after maintenance has started
  23. Question 23 · One correct answer · 1 point

    23. A worker arrives at a job site with an approved permit but has not performed the Start to Work Check or Dynamic Risk Assessment. What should happen?

    1. A. Work may begin because the permit is already approved
    2. B. Work must not begin until the required pre-start safety check is completed
    3. C. Work may proceed if the task is familiar
    4. D. Only the contractor's supervisor needs to be informed afterward
  24. Question 24 · One correct answer · 1 point

    24. Which document is specifically used to describe how a job will be performed safely, together with its associated job hazards?

    1. A. Vehicle Gate Pass
    2. B. Attendance Sheet
    3. C. Visitor Registration Form
    4. D. Method Statement and Job Hazard Analysis (JHA)
  25. Question 25 · One correct answer · 1 point

    25. A contractor intends to conduct welding activities inside the power plant. Which arrangement complies with the facility house rules?

    1. A. Provide an appropriate fire extinguisher for the hot-work activity
    2. B. Use the nearest stationed fire hose for routine welding support
    3. C. Remove a facility fire extinguisher without permission
    4. D. Proceed without fire protection if the work is brief
  26. Question 26 · One correct answer · 1 point

    26. Before a vehicle receives an official facility RTS sticker, which requirement is included in the orientation's vehicle-entry process?

    1. A. Verbal confirmation that the vehicle is roadworthy
    2. B. Vehicle registration alone
    3. C. Compliance with RTS requirements, roadworthiness inspection, and applicable monitoring requirements
    4. D. Approval from the vehicle driver only
  27. Question 27 · One correct answer · 1 point

    27. A driver has already worked for 14 hours in a shift and is requested to transport additional personnel. What is the best action based on the orientation?

    1. A. Continue driving if the destination is nearby
    2. B. Do not extend the driving assignment beyond the stated limit; arrange a suitable replacement
    3. C. Continue if the passengers agree
    4. D. Drive at reduced speed to compensate for fatigue
  28. Question 28 · One correct answer · 1 point

    28. What is the primary purpose of a Journey Management Plan (JMP)?

    1. A. To document vehicle fuel consumption
    2. B. To replace the driver's license
    3. C. To record employee attendance during travel
    4. D. To plan and authorize trips, identify hazards, and establish safe routes
  29. Question 29 · One correct answer · 1 point

    29. During reversing operations involving heavy equipment, a worker notices a stationed spotter directing traffic. What is the safest action?

    1. A. Remain clear of the vehicle movement area and follow the spotter's directions
    2. B. Walk behind the reversing vehicle if there is sufficient space
    3. C. Signal the driver independently without consulting the spotter
    4. D. Cross the route immediately before the vehicle reverses
  30. Question 30 · One correct answer · 1 point

    30. A visitor requests permission to enter the M3 Binary Plant while wearing a standard poly-cotton uniform and ordinary safety shoes. What is the correct response?

    1. A. Allow entry if the visitor stays for less than five minutes
    2. B. Allow entry with a safety helmet and eye protection
    3. C. Deny entry until the required FRAS clothing, static-dissipative footwear, and approval requirements are satisfied
    4. D. Allow entry if accompanied by a plant operator
  31. Question 31 · One correct answer · 1 point

    31. Which statement best describes why an SCBA is used instead of an air-purifying respirator in an oxygen-deficient or IDLH atmosphere?

    1. A. SCBA filters ambient air more efficiently
    2. B. SCBA supplies breathable compressed air independently of the surrounding atmosphere
    3. C. SCBA is intended only for dust exposure
    4. D. SCBA does not require respiratory protection training
  32. Question 32 · One correct answer · 1 point

    32. An emergency evacuation alarm is activated while a contractor is working inside the facility. Which sequence is most appropriate?

    1. A. Finish the task, secure tools, and leave after receiving a phone call
    2. B. Move to the nearest vehicle and depart without reporting
    3. C. Continue work until an ERT member personally arrives
    4. D. Stop work, follow evacuation instructions, proceed to the designated muster point, and remain for accountability
  33. Question 33 · One correct answer · 1 point

    33. After reaching the muster point, a worker wants to return to the work area to retrieve a personal item. What is the correct action?

    1. A. Remain at the muster point until authorized to leave or return
    2. B. Return immediately if no smoke is visible
    3. C. Ask another worker to retrieve the item
    4. D. Leave the muster point after notifying a coworker
  34. Question 34 · One correct answer · 1 point

    34. A contractor arrives for work and tests positive during the mandatory alcohol breath test. What should happen?

    1. A. The contractor may enter if accompanied by a supervisor
    2. B. The contractor may work in non-operational areas
    3. C. Entry must be denied
    4. D. The contractor may enter after signing a waiver
  35. Question 35 · One correct answer · 1 point

    35. A visitor with a valid pass wants to explore an unassigned operational area without a host. Which action complies with the site's security rules?

    1. A. Allow access if the visitor has attended orientation
    2. B. Require the visitor to remain with the host and within authorized areas
    3. C. Allow access after recording the visitor's name
    4. D. Permit entry if the visitor wears complete PPE
  36. Question 36 · One correct answer · 1 point

    36. A worker wants to photograph a geothermal well and nearby piping for a personal social media post. What is the appropriate response?

    1. A. Photography is allowed anywhere if the worker is wearing PPE
    2. B. Photography is allowed as long as no other people are visible
    3. C. Photography is permitted without approval during breaks
    4. D. Photography is restricted to approved areas and requires appropriate authorization; hazardous work areas must be avoided
  37. Question 37 · One correct answer · 1 point

    37. During a field inspection, workers encounter a snake near the work area. What is the most appropriate response?

    1. A. Maintain a safe distance, avoid provoking it, and consult the host for guidance
    2. B. Attempt to capture it for identification
    3. C. Throw objects toward it to force it away
    4. D. Continue working immediately beside it
  38. Question 38 · One correct answer · 1 point

    38. Which worker is most appropriately categorized under Level 1 HESS ID based on the orientation?

    1. A. Crane operator performing lifting activities
    2. B. Rigger assigned to high-risk work
    3. C. Office worker not exposed to high-risk activities
    4. D. Heavy-equipment driver
  39. Question 39 · One correct answer · 1 point

    39. A contractor is applying for a Level 3 HESS ID as a light-vehicle driver. Which of the following is a specific requirement listed in the orientation?

    1. A. Scaffolding NC II
    2. B. Defensive Driving Certificate, professional driver's license, and documented three years of light-vehicle driving experience
    3. C. Five years of heavy-equipment experience only
    4. D. Welding competency certification
  40. Question 40 · One correct answer · 1 point

    40. A contractor witnesses a workplace incident and immediately reports it to the concerned supervisor. According to the incident-reporting timeline, when should the First Alert Report be submitted through CAMMS?

    1. A. Within 30 minutes
    2. B. Within 48 hours
    3. C. Within seven days
    4. D. Within 24 hours
  41. Question 41 · One correct answer · 1 point

    41. A contractor is preparing to perform work at height. Which action best demonstrates compliance with the IOGP Life-Saving Rules?

    1. A. Begin work once a coworker confirms the ladder is stable
    2. B. Use a fall-protection system only when the supervisor is present
    3. C. Verify fall-protection equipment, ensure appropriate anchorage, and comply with the approved work authorization
    4. D. Proceed without fall protection if the work will take less than five minutes
  42. Question 42 · One correct answer · 1 point

    42. During a facility inspection, a worker identifies a leaking high-pressure steam line. Under the EDC-adopted ESBI hazard categorization, how should this hazard be classified?

    1. A. General safety hazard because it affects the surrounding work area
    2. B. System-derived hazard because it originates from engineered process equipment
    3. C. Biological hazard because exposure may affect human health
    4. D. Environmental hazard only because steam is a naturally occurring substance
  43. Question 43 · One correct answer · 1 point

    43. A worker's portable gas detector alarms while working near a geothermal pipeline. What is the most appropriate immediate response?

    1. A. Continue working if no rotten-egg odor is detected
    2. B. Silence the alarm and investigate the source of the gas
    3. C. Wait for another detector to confirm the reading before taking action
    4. D. Stop work, warn nearby personnel, move to a safe area away from the suspected gas plume, and notify the responsible personnel
  44. Question 44 · One correct answer · 1 point

    44. A visitor arrives at the M3 Binary Plant wearing ordinary safety shoes, a standard coverall, and carrying a mobile phone. What should the accompanying host do?

    1. A. Deny entry until the visitor meets the required approval, FRAS clothing, static-dissipative footwear, and electronic-device restrictions
    2. B. Allow entry if the visitor remains within designated walkways
    3. C. Allow entry after the visitor switches off the mobile phone
    4. D. Allow entry if the visit is limited to ten minutes
  45. Question 45 · One correct answer · 1 point

    45. A maintenance contractor has obtained an approved work permit but discovers an unexpected hazard during the pre-task inspection. What is the most appropriate action?

    1. A. Continue work because the permit has already been approved
    2. B. Inform coworkers and proceed with additional PPE
    3. C. Stop the planned activity, reassess the hazard, and ensure the necessary controls and work authorization are reviewed before proceeding
    4. D. Record the hazard in the daily report after completing the task
  46. Question 46 · One correct answer · 1 point

    46. A company driver notices signs of fatigue before transporting workers along the facility's mountainous access road. What should the driver do?

    1. A. Continue driving at a reduced speed
    2. B. Report the condition and arrange appropriate rest or a fit replacement driver before proceeding
    3. C. Drink coffee and proceed as scheduled
    4. D. Ask passengers to monitor the driver during the trip
  47. Question 47 · One correct answer · 1 point

    47. An evacuation alarm sounds while workers are performing maintenance inside the power plant. Which action best complies with the facility's emergency procedures?

    1. A. Finish securing all tools before evacuating
    2. B. Wait for the supervisor to confirm that the alarm is genuine
    3. C. Proceed directly to the parking area and leave the facility
    4. D. Stop work, follow the designated evacuation route, report to the muster point, and remain for accountability
  48. Question 48 · One correct answer · 1 point

    48. A contractor who has completed HSE+S Orientation wants to enter a restricted operational area without authorization. What is the correct action?

    1. A. Deny entry until the required authorization and supervision arrangements are established
    2. B. Allow entry because the contractor has completed the orientation
    3. C. Permit entry if the contractor wears complete PPE
    4. D. Allow entry provided the contractor does not operate equipment
  49. Question 49 · One correct answer · 1 point

    49. During maintenance, a worker discovers a container of used oil without adequate secondary containment near a drainage channel. What is the most appropriate action?

    1. A. Leave the container until the scheduled waste collection
    2. B. Pour the used oil into the drainage channel to prevent accumulation
    3. C. Report the condition and arrange proper containment and handling to prevent environmental contamination
    4. D. Transfer the oil into an unlabeled container and leave it in the work area
  50. Question 50 · One correct answer · 1 point

    50. A contractor successfully passes the HSE+S Orientation Assessment but has not yet completed the required competency documentation for high-risk work. What is the correct interpretation of the passing result?

    1. A. The contractor is automatically authorized to perform all assigned work
    2. B. The contractor has satisfied the assessment requirement but must still comply with applicable HESS ID, competency, and work authorization requirements
    3. C. The contractor may perform high-risk activities while awaiting competency documentation
    4. D. The passing result replaces all additional site-specific safety requirements
  51. Question 51 · Short answer · 1 point

    51. The standardized EDC system for capturing and managing health, safety, and environmental observations and near misses.

    Your answer:

  52. Question 52 · Short answer · 1 point

    52. The formal authority given to personnel to stop or intervene in work activities perceived to be unsafe.

    Your answer:

  53. Question 53 · Short answer · 1 point

    53. The systematic process of identifying workplace hazards, evaluating their potential consequences, and determining appropriate control measures.

    Your answer:

  54. Question 54 · Short answer · 1 point

    54. The specific procedure involving locks and warning tags to prevent the unexpected energization or startup of equipment during maintenance.

    Your answer:

  55. Question 55 · Short answer · 1 point

    55. The respiratory protective device that supplies breathable compressed air from an onboard cylinder for use in oxygen-deficient, toxic, or IDLH atmospheres.

    Your answer:

  56. Question 56 · Short answer · 1 point

    56. The safety document used to formally authorize work activities under the facility's work authorization system, abbreviated PFW.

    Your answer:

  57. Question 57 · Short answer · 1 point

    57. The pre-driving checklist covering Battery, Lights, Oil, Water, Brake, Air, Gas, Engine, Tire, and Self.

    Your answer:

  58. Question 58 · Short answer · 1 point

    58. The designated location where personnel assemble for evacuation, headcount, and accountability during an emergency.

    Your answer:

  59. Question 59 · Short answer · 1 point

    59. The flame-retardant and anti-static protective suit required when entering the M3 Binary Plant.

    Your answer:

  60. Question 60 · Short answer · 1 point

    60. The electronic reporting system identified in the orientation for submission of the First Alert Report within 24 hours.

    Your answer:

How it works with your class

  1. 1. Copy it to your accountOne click. Change anything you want.
  2. 2. Share a link or codeStudents open it on any device, no accounts needed.
  3. 3. See the resultsScores and every answer, checked for you.
Sign up free

More like this