Test
HSE+S Orientation exam SET A
By MAGP Safety · All grades · Published Nov 18, 2026 · New
HSE+S Orientation exam SET A
60 questions · 60 points
Question 1 · One correct answer · 1 point
1. What does HSE+S stand for in the Mt. Apo Geothermal Facility orientation?
- A. Health, Security, Energy and Sustainability
- B. Health, Safety, Environment and Security
- C. Hazard, Safety, Emergency and Security
- D. Health, Systems, Engineering and Safety
Question 2 · One correct answer · 1 point
2. Which company is identified in the orientation as the operator of the Mt. Apo Geothermal Project?
- A. National Power Corporation
- B. Department of Energy
- C. Energy Development Corporation
- D. National Grid Corporation of the Philippines
Question 3 · One correct answer · 1 point
3. Where is the Mt. Apo Geothermal Power Plant located?
- A. Barangay Ilomavis, Kidapawan, Cotabato
- B. Barangay Calinan, Davao City
- C. Barangay Kapatagan, Digos City
- D. Barangay Poblacion, Makilala
Question 4 · One correct answer · 1 point
4. What is the primary purpose of Personal Protective Equipment (PPE)?
- A. To replace engineering controls
- B. To improve worker appearance
- C. To eliminate all workplace hazards
- D. To reduce exposure to workplace hazards
Question 5 · One correct answer · 1 point
5. What does H₂S stand for?
- A. Hydrogen Sulfate
- B. Hydrogen Sulfide
- C. Hydrochloric Sulfide
- D. Hydrogen Sulfite
Question 6 · One correct answer · 1 point
6. Which of the following is a common warning characteristic of hydrogen sulfide at low concentrations?
- A. Sweet fruity odor
- B. Bright yellow color
- C. Rotten-egg odor
- D. Strong chlorine odor
Question 7 · One correct answer · 1 point
7. What should a worker do upon observing an unsafe act or condition?
- A. Immediately report it to the host or Safety Officer
- B. Ignore it if no injury has occurred
- C. Wait until the next safety meeting
- D. Continue working and report it at the end of the shift
Question 8 · One correct answer · 1 point
8. Who is authorized to exercise Stop Work Authority at the facility?
- A. Only the Facility Head
- B. Only the Safety Officer
- C. Only the Nominated Supervisor
- D. All personnel
Question 9 · One correct answer · 1 point
9. Which of the following is the most effective level in the Hierarchy of Controls?
- A. Administrative controls
- B. Elimination
- C. Personal protective equipment
- D. Engineering controls
Question 10 · One correct answer · 1 point
10. What does LOTO mean?
- A. Lockout/Tagout
- B. Log of Technical Operations
- C. Level of Task Observation
- D. Locking of Temporary Openings
Question 11 · One correct answer · 1 point
11. What should personnel do when a facility emergency evacuation alarm is activated?
- A. Continue working until their task is completed
- B. Return to the locker room to collect personal belongings
- C. Stop work and follow the evacuation instructions
- D. Wait for a second alarm before responding
Question 12 · One correct answer · 1 point
12. Which item is strictly prohibited in the M3 Binary Plant explosive-atmosphere zone?
- A. Approved FRAS suit
- B. Static-dissipative safety shoes
- C. Required protective helmet
- D. Personal mobile phone
Question 13 · One correct answer · 1 point
13. What is the purpose of a designated emergency muster point?
- A. To store emergency response equipment
- B. To provide a safe assembly and accountability location
- C. To conduct routine maintenance meetings
- D. To park emergency vehicles
Question 14 · One correct answer · 1 point
14. What is the facility's policy regarding personnel entering under the influence of alcohol or prohibited drugs?
- A. Entry is prohibited
- B. Entry is allowed with supervisor permission
- C. Entry is allowed for office-based personnel
- D. Entry is allowed if no heavy equipment is operated
Question 15 · One correct answer · 1 point
15. Which environmental practice is promoted by the facility?
- A. Disposing of waste in the nearest open area
- B. Mixing recyclable and hazardous waste
- C. Proper waste segregation and Clean As You Go (CLAYGO)
- D. Leaving waste for the next shift to collect
Question 16 · One correct answer · 1 point
16. Under the EDC-adopted ESBI hazard categorization, which of the following is classified as a system-derived hazard?
- A. Biological exposure from insects
- B. Falling from an elevated walkway
- C. Vehicle collision along an access road
- D. Uncontrolled release of high-pressure steam from a process line
Question 17 · One correct answer · 1 point
17. A worker identifies a leaking steam pipeline and recognizes the possibility of severe burns. Which statement correctly differentiates the hazard from the risk?
- A. The pipeline is the risk, while the burn injury is the hazard
- B. The leaking high-temperature steam is the hazard, while the likelihood and severity of burn injury describe the risk
- C. The hazard and risk are identical
- D. The risk exists only after someone is injured
Question 18 · One correct answer · 1 point
18. A worker is positioned directly beneath a suspended load during lifting operations. Which Life-Saving Rule is primarily being violated?
- A. Line of Fire
- B. Driving
- C. Hot Work
- D. Confined Space
Question 19 · One correct answer · 1 point
19. A worker notices a strong rotten-egg odor near a geothermal steam line, but the odor suddenly disappears. What is the safest interpretation?
- A. The gas has completely dispersed
- B. The area is safe because the odor is gone
- C. H₂S may still be present at dangerous concentrations; personnel must not rely on smell
- D. The worker may continue if no other symptoms occur
Question 20 · One correct answer · 1 point
20. A worker begins experiencing dizziness and eye irritation in an area with possible H₂S exposure. What is the most appropriate immediate action?
- A. Remain in position and wait for symptoms to subside
- B. Remove the respirator to improve breathing
- C. Move toward the suspected gas source to investigate
- D. Notify the host and move promptly toward fresh air, avoiding the suspected plume
Question 21 · One correct answer · 1 point
21. During a risk assessment, a team determines that a hazardous chemical can be completely removed from the work process. Which control should be prioritized?
- A. Elimination
- B. Administrative controls
- C. PPE
- D. Warning signage
Question 22 · One correct answer · 1 point
22. A maintenance team plans to service machinery containing electrical, hydraulic, and stored pressure energy. What is the most appropriate safety requirement before work begins?
- A. Post warning signs only
- B. Wear gloves and begin maintenance
- C. Isolate hazardous energy sources and apply the required LOTO procedure
- D. Notify the control room after maintenance has started
Question 23 · One correct answer · 1 point
23. A worker arrives at a job site with an approved permit but has not performed the Start to Work Check or Dynamic Risk Assessment. What should happen?
- A. Work may begin because the permit is already approved
- B. Work must not begin until the required pre-start safety check is completed
- C. Work may proceed if the task is familiar
- D. Only the contractor's supervisor needs to be informed afterward
Question 24 · One correct answer · 1 point
24. Which document is specifically used to describe how a job will be performed safely, together with its associated job hazards?
- A. Vehicle Gate Pass
- B. Attendance Sheet
- C. Visitor Registration Form
- D. Method Statement and Job Hazard Analysis (JHA)
Question 25 · One correct answer · 1 point
25. A contractor intends to conduct welding activities inside the power plant. Which arrangement complies with the facility house rules?
- A. Provide an appropriate fire extinguisher for the hot-work activity
- B. Use the nearest stationed fire hose for routine welding support
- C. Remove a facility fire extinguisher without permission
- D. Proceed without fire protection if the work is brief
Question 26 · One correct answer · 1 point
26. Before a vehicle receives an official facility RTS sticker, which requirement is included in the orientation's vehicle-entry process?
- A. Verbal confirmation that the vehicle is roadworthy
- B. Vehicle registration alone
- C. Compliance with RTS requirements, roadworthiness inspection, and applicable monitoring requirements
- D. Approval from the vehicle driver only
Question 27 · One correct answer · 1 point
27. A driver has already worked for 14 hours in a shift and is requested to transport additional personnel. What is the best action based on the orientation?
- A. Continue driving if the destination is nearby
- B. Do not extend the driving assignment beyond the stated limit; arrange a suitable replacement
- C. Continue if the passengers agree
- D. Drive at reduced speed to compensate for fatigue
Question 28 · One correct answer · 1 point
28. What is the primary purpose of a Journey Management Plan (JMP)?
- A. To document vehicle fuel consumption
- B. To replace the driver's license
- C. To record employee attendance during travel
- D. To plan and authorize trips, identify hazards, and establish safe routes
Question 29 · One correct answer · 1 point
29. During reversing operations involving heavy equipment, a worker notices a stationed spotter directing traffic. What is the safest action?
- A. Remain clear of the vehicle movement area and follow the spotter's directions
- B. Walk behind the reversing vehicle if there is sufficient space
- C. Signal the driver independently without consulting the spotter
- D. Cross the route immediately before the vehicle reverses
Question 30 · One correct answer · 1 point
30. A visitor requests permission to enter the M3 Binary Plant while wearing a standard poly-cotton uniform and ordinary safety shoes. What is the correct response?
- A. Allow entry if the visitor stays for less than five minutes
- B. Allow entry with a safety helmet and eye protection
- C. Deny entry until the required FRAS clothing, static-dissipative footwear, and approval requirements are satisfied
- D. Allow entry if accompanied by a plant operator
Question 31 · One correct answer · 1 point
31. Which statement best describes why an SCBA is used instead of an air-purifying respirator in an oxygen-deficient or IDLH atmosphere?
- A. SCBA filters ambient air more efficiently
- B. SCBA supplies breathable compressed air independently of the surrounding atmosphere
- C. SCBA is intended only for dust exposure
- D. SCBA does not require respiratory protection training
Question 32 · One correct answer · 1 point
32. An emergency evacuation alarm is activated while a contractor is working inside the facility. Which sequence is most appropriate?
- A. Finish the task, secure tools, and leave after receiving a phone call
- B. Move to the nearest vehicle and depart without reporting
- C. Continue work until an ERT member personally arrives
- D. Stop work, follow evacuation instructions, proceed to the designated muster point, and remain for accountability
Question 33 · One correct answer · 1 point
33. After reaching the muster point, a worker wants to return to the work area to retrieve a personal item. What is the correct action?
- A. Remain at the muster point until authorized to leave or return
- B. Return immediately if no smoke is visible
- C. Ask another worker to retrieve the item
- D. Leave the muster point after notifying a coworker
Question 34 · One correct answer · 1 point
34. A contractor arrives for work and tests positive during the mandatory alcohol breath test. What should happen?
- A. The contractor may enter if accompanied by a supervisor
- B. The contractor may work in non-operational areas
- C. Entry must be denied
- D. The contractor may enter after signing a waiver
Question 35 · One correct answer · 1 point
35. A visitor with a valid pass wants to explore an unassigned operational area without a host. Which action complies with the site's security rules?
- A. Allow access if the visitor has attended orientation
- B. Require the visitor to remain with the host and within authorized areas
- C. Allow access after recording the visitor's name
- D. Permit entry if the visitor wears complete PPE
Question 36 · One correct answer · 1 point
36. A worker wants to photograph a geothermal well and nearby piping for a personal social media post. What is the appropriate response?
- A. Photography is allowed anywhere if the worker is wearing PPE
- B. Photography is allowed as long as no other people are visible
- C. Photography is permitted without approval during breaks
- D. Photography is restricted to approved areas and requires appropriate authorization; hazardous work areas must be avoided
Question 37 · One correct answer · 1 point
37. During a field inspection, workers encounter a snake near the work area. What is the most appropriate response?
- A. Maintain a safe distance, avoid provoking it, and consult the host for guidance
- B. Attempt to capture it for identification
- C. Throw objects toward it to force it away
- D. Continue working immediately beside it
Question 38 · One correct answer · 1 point
38. Which worker is most appropriately categorized under Level 1 HESS ID based on the orientation?
- A. Crane operator performing lifting activities
- B. Rigger assigned to high-risk work
- C. Office worker not exposed to high-risk activities
- D. Heavy-equipment driver
Question 39 · One correct answer · 1 point
39. A contractor is applying for a Level 3 HESS ID as a light-vehicle driver. Which of the following is a specific requirement listed in the orientation?
- A. Scaffolding NC II
- B. Defensive Driving Certificate, professional driver's license, and documented three years of light-vehicle driving experience
- C. Five years of heavy-equipment experience only
- D. Welding competency certification
Question 40 · One correct answer · 1 point
40. A contractor witnesses a workplace incident and immediately reports it to the concerned supervisor. According to the incident-reporting timeline, when should the First Alert Report be submitted through CAMMS?
- A. Within 30 minutes
- B. Within 48 hours
- C. Within seven days
- D. Within 24 hours
Question 41 · One correct answer · 1 point
41. A contractor is preparing to perform work at height. Which action best demonstrates compliance with the IOGP Life-Saving Rules?
- A. Begin work once a coworker confirms the ladder is stable
- B. Use a fall-protection system only when the supervisor is present
- C. Verify fall-protection equipment, ensure appropriate anchorage, and comply with the approved work authorization
- D. Proceed without fall protection if the work will take less than five minutes
Question 42 · One correct answer · 1 point
42. During a facility inspection, a worker identifies a leaking high-pressure steam line. Under the EDC-adopted ESBI hazard categorization, how should this hazard be classified?
- A. General safety hazard because it affects the surrounding work area
- B. System-derived hazard because it originates from engineered process equipment
- C. Biological hazard because exposure may affect human health
- D. Environmental hazard only because steam is a naturally occurring substance
Question 43 · One correct answer · 1 point
43. A worker's portable gas detector alarms while working near a geothermal pipeline. What is the most appropriate immediate response?
- A. Continue working if no rotten-egg odor is detected
- B. Silence the alarm and investigate the source of the gas
- C. Wait for another detector to confirm the reading before taking action
- D. Stop work, warn nearby personnel, move to a safe area away from the suspected gas plume, and notify the responsible personnel
Question 44 · One correct answer · 1 point
44. A visitor arrives at the M3 Binary Plant wearing ordinary safety shoes, a standard coverall, and carrying a mobile phone. What should the accompanying host do?
- A. Deny entry until the visitor meets the required approval, FRAS clothing, static-dissipative footwear, and electronic-device restrictions
- B. Allow entry if the visitor remains within designated walkways
- C. Allow entry after the visitor switches off the mobile phone
- D. Allow entry if the visit is limited to ten minutes
Question 45 · One correct answer · 1 point
45. A maintenance contractor has obtained an approved work permit but discovers an unexpected hazard during the pre-task inspection. What is the most appropriate action?
- A. Continue work because the permit has already been approved
- B. Inform coworkers and proceed with additional PPE
- C. Stop the planned activity, reassess the hazard, and ensure the necessary controls and work authorization are reviewed before proceeding
- D. Record the hazard in the daily report after completing the task
Question 46 · One correct answer · 1 point
46. A company driver notices signs of fatigue before transporting workers along the facility's mountainous access road. What should the driver do?
- A. Continue driving at a reduced speed
- B. Report the condition and arrange appropriate rest or a fit replacement driver before proceeding
- C. Drink coffee and proceed as scheduled
- D. Ask passengers to monitor the driver during the trip
Question 47 · One correct answer · 1 point
47. An evacuation alarm sounds while workers are performing maintenance inside the power plant. Which action best complies with the facility's emergency procedures?
- A. Finish securing all tools before evacuating
- B. Wait for the supervisor to confirm that the alarm is genuine
- C. Proceed directly to the parking area and leave the facility
- D. Stop work, follow the designated evacuation route, report to the muster point, and remain for accountability
Question 48 · One correct answer · 1 point
48. A contractor who has completed HSE+S Orientation wants to enter a restricted operational area without authorization. What is the correct action?
- A. Deny entry until the required authorization and supervision arrangements are established
- B. Allow entry because the contractor has completed the orientation
- C. Permit entry if the contractor wears complete PPE
- D. Allow entry provided the contractor does not operate equipment
Question 49 · One correct answer · 1 point
49. During maintenance, a worker discovers a container of used oil without adequate secondary containment near a drainage channel. What is the most appropriate action?
- A. Leave the container until the scheduled waste collection
- B. Pour the used oil into the drainage channel to prevent accumulation
- C. Report the condition and arrange proper containment and handling to prevent environmental contamination
- D. Transfer the oil into an unlabeled container and leave it in the work area
Question 50 · One correct answer · 1 point
50. A contractor successfully passes the HSE+S Orientation Assessment but has not yet completed the required competency documentation for high-risk work. What is the correct interpretation of the passing result?
- A. The contractor is automatically authorized to perform all assigned work
- B. The contractor has satisfied the assessment requirement but must still comply with applicable HESS ID, competency, and work authorization requirements
- C. The contractor may perform high-risk activities while awaiting competency documentation
- D. The passing result replaces all additional site-specific safety requirements
Question 51 · Short answer · 1 point
51. The standardized EDC system for capturing and managing health, safety, and environmental observations and near misses.
Your answer:
Question 52 · Short answer · 1 point
52. The formal authority given to personnel to stop or intervene in work activities perceived to be unsafe.
Your answer:
Question 53 · Short answer · 1 point
53. The systematic process of identifying workplace hazards, evaluating their potential consequences, and determining appropriate control measures.
Your answer:
Question 54 · Short answer · 1 point
54. The specific procedure involving locks and warning tags to prevent the unexpected energization or startup of equipment during maintenance.
Your answer:
Question 55 · Short answer · 1 point
55. The respiratory protective device that supplies breathable compressed air from an onboard cylinder for use in oxygen-deficient, toxic, or IDLH atmospheres.
Your answer:
Question 56 · Short answer · 1 point
56. The safety document used to formally authorize work activities under the facility's work authorization system, abbreviated PFW.
Your answer:
Question 57 · Short answer · 1 point
57. The pre-driving checklist covering Battery, Lights, Oil, Water, Brake, Air, Gas, Engine, Tire, and Self.
Your answer:
Question 58 · Short answer · 1 point
58. The designated location where personnel assemble for evacuation, headcount, and accountability during an emergency.
Your answer:
Question 59 · Short answer · 1 point
59. The flame-retardant and anti-static protective suit required when entering the M3 Binary Plant.
Your answer:
Question 60 · Short answer · 1 point
60. The electronic reporting system identified in the orientation for submission of the First Alert Report within 24 hours.
Your answer:
How it works with your class
- 1. Copy it to your accountOne click. Change anything you want.
- 2. Share a link or codeStudents open it on any device, no accounts needed.
- 3. See the resultsScores and every answer, checked for you.
More like this
Test
Cybersecurity Awareness Quiz
Kindly use your Fullname or MBO emaill address as your username
Cybersecurity · All grades · New · Nov 3, 2026
Test
UGBES ACADEMY TEST
ENGLISH - EACH QUESTIONS CARRY 2.5 MARKS . READ EVERY QUESTION PROPERLY NO CHEATING HAUSA KOWACE TAMBAYA TANA DA MAKIRCI 2.5. KU KARANTA KOYARWAR TAMBAYA SOSAI. KADA A YI CUTARWA KO YAUDARA A JARABAWA.
All grades · New · Nov 14, 2026
Test
Crisis Escape Room
All grades · New · Nov 6, 2026
Test
SECONDARY 2_GELOSEA Mock Test
Ngoại ngữ · All grades · New · Nov 8, 2026
Quiz
B3 Teachers’ Grammar Assessment
If you use AI, I'll know 🫵
English · Professional development · New · Nov 3, 2026
Test
2 sec- unit 2
All grades · New · Nov 10, 2026